banner



What To Do After Clean Install Of Windows 7

INTRODUCTION

In certain scenarios you may need to restore your Windows vii Figurer back to the previous installation of Windows. This article walks you through the steps to manually restore your computer back to the previous version of Windows.

Annotation: To do this, you must use the command prompt, and y'all must type specific commands at the command prompt to rename and to move folders betwixt the different versions of Windows.

Note: If you currently have Service Pack ane for Windows seven installed, the uninstall steps are the same every bit with Windows vii without any service packs installed. If you are restoring back to a previous Windows 7 installation, y'all may demand to Install Windows 7 Service Pack one to that installation.

This article is intended for a commencement to intermediate computer user.

More than Information

To resolve this issue, follow the steps listed below to restore your computer back to a previous version of Windows using the Windows.Onetime folder.

TIP: You may detect information technology easier to follow the steps if you print this article get-go.

Step 1: Determine whether there is a Windows.old folder and whether there is sufficient free space on the Windows hard disk

  1. Click Start windows icon, and so click Computer.

  2. On the View menu, click Details.

  3. In the Free Space column, note how much space is available for Local Deejay (C:) under the Hd Drives area.

  4. In the Hard disk drive Drives area, double-click Local Disk (C:), and then decide whether the Windows.erstwhile binder exists.

    Important If the Windows.former folder does non exist, you cannot follow the steps in this commodity to restore the previous Windows installation to this computer. Y'all must backup and restore or transfer your files to the previous operating system.

  5. Right-click the Windows.old folder.

  6. Windows 7 will determine the size of the folder afterwards several seconds.

Determine whether the Windows.old folder is smaller than the free infinite that is available for Local Disk (C:) in step 1.two.

Note If the Windows.old folder is 2 times as large as the complimentary space that is available for the Local Disk (C:) entry, you may be unable to restore the previous Windows installation.

Step 2: Start the Windows Recovery Environment

  1. Put the Windows vii installation disc in the DVD drive, and and then restart the computer.

  2. Press a cardinal when you are prompted to restart from the disc.

  3. In the Install Windows window, select a language, a fourth dimension, a currency, a keyboard input method or other input method, and then click Side by side.

  4. In the Install Windows window, click Repair your estimator.

  5. In the Organization Recovery Options window, click the version of the Windows 7 operating system that you want to repair, then click Adjacent.

  6. In the System Recovery Options window, click Control Prompt.

The Command Prompt window opens, and it displays the control prompt. The command prompt is where you will type the commands that are described in the post-obit steps.

Step 3: Motility the Windows 7 folders to a new Win7 folder

Note When you type ane or more of the commands at the control prompt in the following steps and press ENTER, yous may receive the post-obit message:

The system cannot observe the file specified.

If you receive this message, go to the next step in this section, and and so type the command in that adjacent step.

Type the following commands and press ENTER after each control:

C:

Md Win7

Motion Windows Win7\Windows

Move "Program Files" "Win7\Program Files"

Movement Users Win7\Users

Attrib –h –s –r ProgramData

Motility ProgramData Win7\ProgramData

Rd "Documents and Settings"

Step iv: Copy the contents or move the contents of the Windows.old binder

Note When you type one or more than of the commands at the command prompt in the following steps and press ENTER, you may receive the following bulletin:

The organisation cannot find the file specified.

If yous receive this message, go to the next pace in this department, so type the control in the adjacent stride.

Type the post-obit commands and press ENTER after each command:

movement /y c:\Windows.sometime\Windows c:\

move /y "c:\Windows.sometime\Programme Files" c:\

move /y c:\Windows.old\ProgramData c:\

motion /y c:\Windows.old\Users c:\

move /y "c:\Windows.old\Documents and Settings" c:\

Stride 5: Restore the boot sector for the previous Windows installation

Type ane of the post-obit commands at the command prompt, every bit appropriate for your state of affairs.

Notation In the post-obit commands, D: represents the DVD drive. If the DVD drive on the computer is represented by a different letter of the alphabet, such every bit Due east:, utilise that letter of the alphabet in the command.

  • When the previous Windows installation was Windows Server 2003, Windows XP, or Microsoft Windows 2000

    Type the post-obit command, and then press ENTER:

    D:\boot\bootsect /nt52 c:

  • When the previous Windows installation was Windows Vista

    Type the following command, and and so printing ENTER:

    D:\kick\bootsect /nt60 c:

Footstep half dozen: Restore the Boot.ini file for the previous Windows installation of Windows XP or of Windows 2000

Note Follow these steps only when the previous installation is Windows XP or Windows 2000.

Type the following commands and press ENTER later each command:

Attrib –h –southward –r boot.ini.saved

Re-create boot.ini.saved boot.ini

Step 7: Close the Command Prompt window, so click Restart

  1. Type the following command at the control prompt, and and so press ENTER:

    leave

  2. Click Restart to restart your reckoner.

Notation After you lot take verified that Windows XP is functional, you tin remove the C:\Win7 folder if it is non needed for data recovery.

Boosted resources

Demand more help?

Source: https://support.microsoft.com/en-us/topic/how-to-restore-a-windows-7-based-computer-to-a-previous-windows-installation-by-using-the-windows-old-folder-bee6e378-866f-67ae-01a3-240ab0f2bca0

Posted by: howellmagery.blogspot.com

0 Response to "What To Do After Clean Install Of Windows 7"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel